Eurorack Modules & Systems

4ms -

4ms - Breakout module for SCM

Expansion module (Breakout Panel) for the 4ms Shuffling Clock Multiplier provides these additional features: CV Shuffle (jack and knob) - Selects which beats are “slipped” by CV Slip CV Pulse Width (jack and knob) - Controls width of output pulses...

$99.00

4ms -

4ms - Noise Swash module

The eurorack noise swash is a chaotic random noise-maker and cv generator, generating its own sounds or working as an audio processor. As a stand-alone device it generates unpredictable continuously morphing oscillations on the audio output jack,...

$325.00

4ms -

4ms - Pingable Envelope Generator PEG

IN STOCK!! The Pingable Envelope Generator (PEG) from 4ms is a dual envelope generator whose envelope lengths are set by incoming clocks or "pings". The PEG has full CV control of envelope shape, skew, and ping (clock) division/multiplication, as...

$345.00

4ms -

4ms - Rotating Clock Divider module

The 4ms Pedals Rotating Clock Divider is a eurorack pulse divider capable of dividing an incoming clock source by 2-64. Depending on the user-selectable jumper setting on the back, (breakout panel coming soon), you have several options. The divider...

$179.00

4ms -

4ms - Shuffling Clock Multiplier module

The 4ms Shuffling Clock Multiplier is the perfect counterpart to the 4ms Rotating Clock Divider. Prepare to wield one of the sharpest tools available in the Eurorack format. While the RCD divides, the SCM multiplies and then some. The SCM starts by...

$179.00

4ms -

4ms - VCA Matrix Eurorack Module

The newest Eurorack module from 4ms, the VCA Matrix, is a playable 4x4 matrix of 16 VCAs. Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons. Features: 4...

$375.00

Analogue Systems - Apprentice Walnut Eurorack Cabinet

This is basically a Sorceror minus the keyboard, MIDI interface and joystick (modules shown in picture are not included). 168hp of module space in a walnut cabinet complete with 1.5 amp power supply. When fitted with optional RS140 Midi/CV module...

$1,425.00

Analogue Systems - Double Sequencer in walnut cab

Double Sequencer in solid American walnut cabinet: rs200 (x2) 8x3 Step Sequencers rs150 Sequential Switch rs260 Voltage Quantiser rs280 Signal & Trigger/Clock Divider rs150 Sequential Switch

$3,995.00

Analogue Systems - Eurorack case - Walnut (36HP) w/power

Analogue Systems' small walnut case is a handcrafted beauty to behold. With built-in power supply, it houses up to 36HP of modules, enough room for a the rs240 Bode Frequency Shifter and rs270 Adapter/Converter. Modules are not included with this...

$499.00

Analogue Systems - French Connection Ondes Martenot style controller

Based upon the legendary Ondes Martenot, the French Connection is a unique controller for virtuoso performance. By placing a finger through the ring suspended below the physical keyboard, the player can glide smoothly between notes by moving the...

$3,199.00

Analogue Systems - Museum Of Synthesizer Technology Book

Here is "The Museum Of Synthesizer Technology" book. There are 118 pages filled with color photos of Martin Newcomb's amazing collection of synthesizer classics. This is a must-have for any analog synthesizer fanatic! Here are some of the...

$29.95

Analogue Systems - rs100s Low Pass Filter (VCF) module

Manual, click on MODULES INTRODUCTION Filters are the means by which we modify sounds to create new sounds. The most common way in which they do this is by removing parts of the audio spectrum - attenuating the low frequencies and/or the high...

$209.00

Analogue Systems - rs110 Multi-mode Filter module

INTRODUCTION The pioneers of synthesis understood that the flexibility with which a signal could be routed through filters was one of the most important elements of a synthesiser. Their modular synths featured four different types of filter: high...

$239.00

Analogue Systems - rs120 Comb Filter module

INTRODUCTION Many players and programmers believe that it is the filters that define an instrument’s sound, yet few look any further than the simple low-pass filter found on almost all analogue synthesisers. But endless tedious arguments about the...

$210.00

Analogue Systems - rs130 Scale Generator module

The RS130 offers four preset scales and memory for one user-defined scale. It also comes with a range of 63 notes, plus a trigger output generator. There are gated and "free" modes for a wide range of applications. A Voltage Quantiser is a device...

$599.00

Analogue Systems - rs140 Midi/CV Converter module

Upon its introduction in 1983, MIDI completely changed the way that we view and use synthesizers. It opened up music-making possibilities that were unthinkable a few years before, and made possible all manner of advanced sequencing and control...

$539.00

Analogue Systems - rs150 Sequential Switch module

The A.S. rs150 Sequential Switch module allows you to select between multiple inputs and direct the chosen signal to the input of the next module in the patch. Selection may be manual or may be triggered by the application of a suitable clock or...

$209.00

Analogue Systems - rs160 CV Mixer module

INTRODUCTION Consider, for example, a patch in which you wish simultaneously to pass the outputs from three or four devices to another module. Clearly, you will need to mix the sounds or CVs together before you can do so. Furthermore, you may wish...

$115.00

Analogue Systems - rs165 Signal Mixer module

$115.00

Analogue Systems - rs170 Multiple module

One output for many inputs? There are many occasions when you will want to direct a single CV or signal to multiple destinations, and for these applications you will need some form of signal 'splitter'. For example, you may wish to take a single...

$79.00

Analogue Systems - rs190 VU Meter / Inverter module

It can be very useful to know the voltage being produced by any module within the Integrator. This can help you to refine your patches, and to check that modules are responding as you think they should. IN USE CV/Signal Input The RS190 offers a...

$239.00

Analogue Systems - rs20 Ring Mod module

Ring Modulator INTRODUCTION There are two types of ring modulator (RM) used in audio synthesis: AC-coupled, and DC-coupled. These are alternative configurations of the same device, but will often produce different results from the same inputs. ...

$179.00

Analogue Systems - rs200 3x8 Step Sequencer module

INTRODUCTION It’s tempting to compare analogue sequencers to hardware MIDI sequencers, both rackmount and computer-based, if only because they are all capable of producing repetitive sequences and effects that can be modified in real-time. But,...

$735.00

Analogue Systems - rs200 Sequencer System

The rs200 Sequencer System contains the rs200 Sequencer, rs150 4-channel sequencer switch and rs280 audio / trigger clock divider. The rs200 System has three channels, A, B and C, with individual controls for each of the eight steps and a stepped...

$1,599.00

Analogue Systems - rs210 Fixed Filter Bank module

INTRODUCTION In addition to various types of VCF, there is another class of filter that you will occasionally find on powerful synthesisers. These are the fixed filter banks, and they differ from low-pass, high-pass, band-pass or band-reject...

$195.00

Analogue Systems - rs215 Eight-band Octave Filter module

New 8-band 'Octave' Filter from Analogue Systems. Frequency bands include: 100Hz 200Hz 400Hz 800Hz 1,600Hz 3,200Hz 6,400Hz 12,000Hz

$255.00

Analogue Systems - rs220 Joystick module

Nowadays the synthesiser is almost always considered to be a keyboard instrument, much like a piano or an organ. This is a view that is as much a consequence of modern synthesiser design as it is a necessary part of that design. In other words, we...

$269.00

Analogue Systems - rs230 CV Buffer / Inverter module

INTRODUCTION The RS230 CV buffer is an electronically active version of the RS170 Multiple. However, unlike the RS170, you should not attempt to use the RS230 to combine the outputs from multiple source modules. It will not act as a mixer. IN...

$119.00

Analogue Systems - rs240 Bode Frequency Shifter module

This module is special. It is the only frequency shifter module that really can be compared to an original and rare Bode Frequency Shifter. A frequency shifter is a highly specialized module capable of shifting the spectrum of a signal by a fixed...

$2,099.00

Analogue Systems - rs260 Voltage Quantizer module

The RS260 incorporates software that ensures glitch-free transitions between quantised notes. It also offers two operational modes. Free Run shifts the CV every time it changes enough to move from one semitone to another, whereas Gate requires a...

$299.00

Analogue Systems - rs270 Adaptor Converter module

The rs270 Adaptor Converter module is very handy. There are four sections. Two sections convert between 1/4", 3.5mm and RCA plugs while the other two convert between 1/4" and 3.5mm only.

$105.00

Analogue Systems - rs280 Signal & Trigger/Clock Divider module

The rs280 is a frequency detector and divider that produces a number of squarewave signals derived from the frequency of any cyclic signal presented to its input. It has a single input, five outputs, and five LEDs that give a visual indication of...

$189.00

Analogue Systems - rs290 V.C. Delay/Sampler module

The rs290 is an amazing voltage-controlled delay/sampler. Stunning 48khz, 16-bit, 5.5 second stereo echo and delay with user assignable control of MIDI, analogue clocks and triggers. CV calculates the correct delay time to the incoming tempo. 32...

$659.00

Analogue Systems - rs295 Expander module (for the rs290)

Expander module for the rs290 featuring the MIDI interface and a 2nd user assignable feature.

$105.00

Analogue Systems - rs30 Frequency to Voltage + Envelope module

INTRODUCTION The rs30 was designed for frequency to voltage applications which makes it compatible with Korg, Yamaha, etc. There are times when you might want to use external signals to control the Integrator. Obvious examples of this are using a...

$249.00

Analogue Systems - rs300 CV to MIDI module

The inverse of a MIDI to CV converter, the rs300 is an eight-channel, user-programmable CV to MIDI converter which will allow for the translation of analog voltages into MIDI NOTES or midi data for any of the 127 MIDI controllers. Now you can use...

$779.00

Analogue Systems - rs310 Reverb/Chorus w/CV module

The rs310 is a complex BBD (bucket brigade device) analogue delay line with variable feedback. Unlike the simpler BBDs found in other delays and comb filters, it incorporates six unrelated "taps" at quasi-random delay points and with differing...

$275.00

Analogue Systems - rs340 Gate Delay and Trigger module

The rs340 is a multi-mode Gate Delay module and Shaper that recognizes any positive-going pulse exceeding +1V, and then generates a Trigger and a Gate of specified duration a user-defined time afterwards. Two LEDs offer visual feedback regarding the...

$169.00

Analogue Systems - rs35 External Source Processor module

The Analogue Systems rs35 External Source Processor is an exceptionally accurate pitch to voltage converter. The rs35 has two different types of outputs, plus an additional slew circuit. It accepts mic and line level inputs. Output 1 is normal and...

$279.00

Analogue Systems - rs350 Slew Limiter module

Unlike the other slew limiters in the RS Integrator, the rs350 is voltage-controlled, allowing you to control the amount of slew (or glide) dynamically. This permits a number of interesting possibilities that are not available elsewhere. For...

$169.00

Analogue Systems - rs360 Vocal/Phase Filter Bank module

Just as the precise positions and shapes of the formants in a human voice allow you to identify the speaker as well as the vowel sound spoken, formants make the timbres of acoustic instruments consistent and recognizable from one instrument to the...

$469.00

Analogue Systems - rs370 Polyphonic Harmonic Generator module

Click here to download the current User Manual for the rs370 (V3.7). 6-voice polyphonic harmonic generator and wavetable synthesizer (currently with 16 wave banks), 4 generator per note additive synthesis engine. Additional features include fully...

$1,249.00

Analogue Systems - rs375 Expander (for rs370) module

The rs375 Expander module works with the r370 Polyphonic Harmonic Generator module and allows manipulation of up to 24 harmonics via voltage control with 16 level pots. This is a must have when generating real time additive synthesis in single-voice...

$599.00

Analogue Systems - rs376 PHG Expander (for rs370) module

The rs376 is a useful expander for the rs370 for users who do not require the real-time additive synthesis capabilities of the rs375 module but wish to take advantage of 4 extra CV inputs and 4 controller outputs.

$229.00

Analogue Systems - rs380 Modulation Controller module

The rs380 is a composite module comprising four separate “sub-modules” that you can patch together or with other RS Integrator modules to generate and control a wide range of effects. It is designed for use when space is at a premium, and combines a...

$239.00

Analogue Systems - rs390 Echo module

The rs390 is a 24-bit stereo digital delay line with a sample rate of 46.9kHz, and a maximum delay time of approximately three seconds. It offers three delay ranges with CV control, as well as CV control of the dry/wet mix. The input and output...

$479.00

Analogue Systems - rs40 Sample + Hold w/Noise module

The RS40 Noise Generator / Sample & Hold / Clock is really three separate ‘sub-modules’ that you can patch together to help generate classic Sample & Hold effects. But effects are far from the only uses for the sub-modules, and they can be patched...

$199.00

Analogue Systems - rs400 Phase Shifter module

The rs400 is the famous Equinoxe phase shifter designed by Oakley Sound for Analogue Systems. It is a 4-stage phaser with an integrated LFO and CV inputs to control the notch frequencies. It offers variable resonance to create a wide range of...

$319.00

Analogue Systems - rs420 Octave Controller module

The Analogue Systems rs420 Octave Controller has arrived! The rs420 is a multi function module which includes a slew generator (for portamento / glide effects) and also a CV buffer. The rs420 can control up to 3 VCO's with global transposition and...

$285.00

Analogue Systems - rs430 Distortion module w/ V.C. module

The Analogue Systems rs430 Distortion module is based on the classic Univox Super-Fuzz pedal. This is considered by many as the holy grail of fuzz pedals. The rs430 features CV inputs on both 'Drive' and 'Mix' ins. Controls include: Drive, Mix,...

$279.00

Analogue Systems - rs440 BBD Analogue Delay module

Analogue delay module with 3328 stage bbd chip. Voltage control of delay time and wet and dry mix.

$299.00

Analogue Systems - rs450 CV Recorder module

The rs450 cv recorder is both a multi channel realtime control voltage recorder as well as a audio waveform sampler when used in its real time mode, in its step time mode it operates as a step time recorder of control voltages similar in operation...

$1,295.00

Analogue Systems - rs50 Trigger Generator module

Like the RS40, the RS50 Shaper/Trigger/Shifter offers three ‘sub-modules’ that extend the capabilities of your Integrator in ways that are not possible with basic modules such as VCOs, VCFs and VCAs. Trigger Some analogue synthesisers generate...

$195.00

Analogue Systems - rs500e EMS Synthi Filter module

Genuine EMS licensed Synthi filter. This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the...

$269.00

Analogue Systems - rs510e EMS Synthi Trapezoid Generator module

Genuine Ems trapezoid generator featuring Attack, On, Decay, Off and Trapezoid output level. With v.c of Decay time, status led, Sig in and Sig out, Gate in and Outputs A and B this classic timing generator when used with rs500e captures the essence...

$339.00

Analogue Systems - rs60 V.C. ADSR module

INTRODUCTION Periodic waveforms - such as those produced by VCOs and LFOs - have easily recognised pitches, amplitudes and waveforms that you can spot on an oscilloscope or screen. (For a brief discussion of these please turn to the chapters...

$205.00

Analogue Systems - rs600 Performance Wheels module

The Analogue Systems rs600 'Performance Wheels' module is a nice alternative to rs220 Joystick Controller for the Demon or Sorcerer keyboard. The rs600 can also be used as a module in its own right in any Eurorack modular setup. Clear backlit wheels...

$299.00

Analogue Systems - rs70 Inverter / Preamp module

INTRODUCTION An inverter is an example of a 'Voltage Processor'. It produces no signal of its own, but affects those presented to its input. The result of the process depends upon the nature of the source signal and, since CVs as well as audio...

$179.00

Analogue Systems - rs80 LFO module

INTRODUCTION Not all periodic oscillations occur within the range of audible frequencies, but this does not mean that you can not hear them. For example, a violinist’s vibrato may take the form of an oscillation at, say, 5Hz, while the growl...

$199.00

Analogue Systems - rs85 Extended LFO module

Extended LFO. Third range added for super slow sweeps. Center-detent pot on Saw/Tri output and dual-LED for visual feedback of frequency and cycle.

$235.00

Analogue Systems - rs95e VCO module

Click here to see our YouTube video demo of the rs95 oscillator. Click here to download the users manual for the rs95 (PDF). The new Analogue Systems rs95e VCO is identical to the rs95 with the addition of a fine tuning frequency control. Most...

$315.00

Analogue Systems - Sorcerer Keyboard / Eurorack Cabinet

A 49-note keyboard controller designed for all vintage and modern analog applications. Included are a joystick and a controller module with extensive mod and priority options. It's all delivered in a beautifully finished walnut case with 6-U of...

$1,995.00

Analogue Systems - Sorcerer w/ System 1 modules

The Analogue Systems Sorcerer is a 49-note keyboard enclosed in a breathtaking American walnut cabinet, with all of the System 1 modules installed. The Sorcerer is a powerful stand-alone analog modular system. A future classic to be sure. 49-note...

$3,795.00

Analogue Systems - System 1 Modular in Walnut Apprentice case

A self-contained array of modules in a beautiful walnut Apprentice cabinet with everthing necessary to create serious electronic music. The quality is superb. The layout is excellent but may be altered at will to suit the individual user. Since it's...

$4,125.00

Analogue Systems - System 1 Modular Rack

A self-contained array of modules with everything necessary to create serious electronic music. The quality is superb. The Layout is excellent, but may be simply altered to suit the individual user. Since it's all modular, it is easy to interface...

$3,149.00

Analogue Systems - System 3 Modular in Walnut Apprentice case

Analogue Systems solid walnut Apprentice case containing: rs20 Ring Mod rs60 VC ADSR rs60 VC ADSR rs95 High End VCO rs95 High End VCO rs110 Multi-mode Filter rs120 Comb Filter rs140 Midi/CV Converter rs160 CV Mixer rs165 ...

$4,395.00

Analogue Systems - System 3 Modular Rack

Analogue Systems rs15 case containing the following modules: rs20 Ring Mod rs60 VC ADSR rs60 VC ADSR rs95 High End VCO rs95 High End VCO rs110 Multi-mode Filter rs120 Comb Filter rs140 Midi/CV Converter rs160 CV Mixer rs165 ...

$3,399.00

Analogue Systems - System 8000 modular in solid walnut cabinet

Top Row: rs130 Scale Generator rs280 Signal & Trigger/Clock Divider rs170 Multiple rs160 CV Mixer rs180 VCA rs180 VCA rs180 VCA Row 2: rs270 Adaptor Converter rs70 Pre-amp rs30 Voltage & Envelope rs50 Trigger Generator rs60 VC ADSR rs60 VC ADSR rs60...

$7,995.00

Analogue Systems - System 8500 modular in solid walnut cabinet

System 8500 Synthesizer configuration: TopRow: RS270 Adaptor Converter RS190 VU Meter / Inverter RS70 Pre-amp RS30 Voltage & Envelope RS50 Trigger Generator RS160 CV Mixer RS340 Gate Delay and Trigger RS340 Gate Delay and Trigger RS170 Multiple RS60...

$14,995.00

Analogue Systems - System 8500 modular w/ Double Sequencer in solid walnut cabinet

Double Sequencer Cabinet: RS200 8x3 Step Sequencer RS150 Sequential Switch RS260 Voltage Quantiser RS280 Signal & Trigger/Clock Divider RS150 Sequential Switch RS200 3x8 Step Sequencer Synthesizer Cabinet (stock modules): TopRow: RS270 Adaptor...

$17,895.00

AnalogueSolutions -

AnalogueSolutions - Telemetry (mini Vostok) analog synth

KEY FEATURES: Pure analogue voice circuitry Patch points to allow more sound types, and to cross-patch with your modular synths Mini Pin Matrix patch panel to eliminate the use of some patch cables Plenty of modulation possibilities Rugged...

$1,935.00

Bananalogue -

Bananalogue - Serge 3P module (eurorack)

The Bananalogue Serge 3P is a three input, one output full processor for adding or inverting control voltage. A manual offset can be applied to the three outputs as well. Useful for mixing and massaging CV, inverting triggers for drum machines or as...

$119.00

Bananalogue -

Bananalogue - Serge VCS module (eurorack)

Designed by Seth Nemec and Ken Stone with the cooperation of Serge Tcherepnin, the Serge VCS universal slope generator is now available in eurorack modular format from Bananalogue. The VCS packs a lot of functions into a 16hp module. Uses include...

$275.00

Bananalogue -

Bananalogue - Serge WVX module (eurorack)

The WVX is based on the classic Wave Multiplier module designed by Serge Tcherepnin. Top and bottom sections of the unit are independent and transform an output wave in various ways. The effect is non-linear and useful on both audio and control...

$315.00

Bubblesound - cvWS

The cvws is dual wave shaper based on 2 of the wave shapers found in the ulfo. The top one is the saw shaper. This takes a square and triangle and turns them into a saw, as long as the square and triangle are in phase. While this can be useful by...

$140.00

Bubblesound - LvL+rm

The LvL+rm is bubblesound's first general utility module. It consists of 4 Level Shifting amps and a 1496 based ring modulator. The Level Shifters can be used in a several ways. Initially this was designed to allow uLFO owners to take an output and...

$140.00

Bubblesound - SeM20 V|S|F

The SeM20 is a 2 pole state variable filter loosely based on the Oberheim SEM's filter with the resonance section of the MS20 grafted on for extra bit of grit. It won't self ocillate, usually, but with an input, or the High Pass out plugged into the...

$199.00

Bubblesound - uLFO

The ulfo is an voltage-controlled analog low frequency oscillator based around a classic triangle core vco running through a series of waveshapers, giving the user an extremely wide range of outputs and modulation options. In the low range the ulfo...

$250.00

Bubblesound - VCOb

The VCOb is an voltage-controlled analog oscillator based around a classic triangle core VCO. It is similar to the uLFO, but with some improvemnets. The range of the VCOb is one of the widest in the analog modular world. And like all triangle cores...

$225.00

Circuit Abbey - ADSRjr

The ADSRjr is an envelope generator with many features. Standard gate input jack is normalled to the Doepfer bus gate signal. Three time ranges cover times from tiny to huge. Linear or expo curves are jumper selectable. A cycle button creates...

$150.00

Circuit Abbey - ADSRjr Expander

The expansion module brings out a metric boatload of features: CV control of each segment, trigger button and jack, buttons replace the linear/expo jumpers, end of attach, decay and release outputs, and an inverted output. Expansion Features: CV...

$75.00

Circuit Abbey - Gozinta - Line Level Amplifier

The Gozinta is an input module capable of amplifying line level signals to Eurorack levels. The 2 independent channels have nominal 24dB gain and include front panel  attenuators. Ultra-modern amplifier ICs give this module excellent...

$100.00

Circuit Abbey - Gravity Well - Wave Modifier

he Gravity Well is a wave modifier using asymmetrical wave warping to create interesting new sounds. Think of the signal in orbit around a heavenly body whose gravity is being changed by the CV inputs. One CV varies the gravity field, another pushes...

$225.00

Circuit Abbey - Impulse Drive

Impulse Drive: A wave multiplying signal processing module which produces thick CV-able harmonic fields. The Impulse Drive crossfades any two input sources and drives three comparator engines that are then cross-modulated to create unheard of sonic...

$235.00

Circuit Abbey - Invy

The Invy is a 2 channel attenuverter/offset module. Each channel has an attenuverter and an offset control. The input jacks are normalled, and the outputs mix down to Out2 if there is no patch cord in Out1. The outputs can be used as offset only. ...

$100.00

Circuit Abbey - TripFire - Comparator / Multi-mode Trigger / Gate Delay

The Trip/Fire is a very handy dual utility Euro Rack module in 4HP. The top half is a full featured comparator, and the  bottom module is a multi-mode trigger/gate delay. It is great  for creating new rhythms, triggering envelopes,...

$150.00

Cwejman - ADSR-VC2 Dual Transient Generator module

Both envelope generators are identical and provide control voltages that can be used for dynamic change of all voltage controlled parameters, such as; frequency, amplitude, pulse width, cutoff. The most common use is controlling a filters cutoff...

$650.00

Cwejman - Ai-2 Audio Interface module

The Ai-2 is an audio interface which allows you to easily connect modules with mixer consoles, tape recorders or any kind of DAW with XLR balanced inputs and outputs. The gain compensation is provided by the GAIN TRIM knobs in the range of 20 dB....

$325.00

Cwejman - AP-1 Audio Processor module

The AP-1 consist of three parts: Microphone/Instrument amplifier, Envelope follower & Opto compressor. Preamp section The preamp section consist of a low noise /high speed gain booster for signals to an adequate level for the opto compressor. Two...

$685.00

Cwejman - ATT-4 Quad Attenuator module

The ATT-4 consists of four independent manual attenuators and it is ideal as interface between modulation sources and modules with direct CV inputs (not attenuable CV inputs). It has additionally LEVEL/BIAS SHIFTERS which converts nominal signals ±5...

$299.00

Cwejman - BLD Bass-Lead & Drum Generator module

The BLD has all the components and functions necessary for generating bass, lead, and drum sounds with the main focus on bass drum sounds. It can be trigged by a push button or by an external signal (any shape). The pitch, cutoff frequency,...

$700.00

Cwejman - CRV-24 Audio Frequency Crossover module

The CRV-24 is a 4-band crossover with 24 dB/octave slope for all four bands. Crossover frequencies can be controlled manually and by attenuable CV signals. The incoming signal INPUT is split into four bands; LP (low pass filter), MID1 (high/low...

$750.00

Cwejman - CTG-VC Complex Transient Generator module

The CTG-VC module provides control voltages that can be used for dynamic change of all voltage controlled parameters, such as; frequency, amplitude, pulse width, and cutoff. The most common use is controlling filters' cutoff frequency and...

$600.00

Cwejman - D-LFO Dual LFO (with LED's) module

Back in stock. Please note: D-LFO modules now have the new eggshell white front panels. We will update the picture soon. The D-LFO consists of two identical low frequency oscillators. LFO2 can be internally synced to LFO1 by an internal switch. The...

$675.00

Cwejman - DMF-2 Dual-Mode 2-Channel Filter module

The DMF-2 is a dual mode and dual slope filter. The DMF-2 emulates the familiar low pass filter in 4 pole mode and expands sonic potential by adding a unique designed 6 pole low pass mode and quasi and pass mode. Both filters (A and B) are identical...

$590.00

Cwejman - DP-2 Dynamic Processor module

Our first batch of DP-2 modules has arrived! Get one while our supply lasts.

$949.00

Cwejman - FSH-1 Frequency Shifter module

The FSH-1 is a frequency shifter module based on the RM-2S Ring Modulator module. The main purpose with the frequency shifter is to make frequency shift up and down for processed audio signal. Two signal sources are needed; the carrier and the...

$749.00

Cwejman - INS-2MX Dual Insert VCA module

The main purpose of the INS-2MX is, together with MX-4S, stand alone or other module(s), insert effects in the audio (or control signals) chain. The INS-2MX consist of two VC amplifiers, two insert VC amplifiers and controllers. All parameters can...

$495.00